Since the advent of LCD splicing, many manufacturers have followed suit, especially in recent years, the splicing gap of LCD splicing has continuously narrowed, making many traditional DLP rear-projection splicing companies begin to get involved in LCD. This move has led some people to start guessing, is the rear projection splicing deadlocked? Why do rear-projection manufacturers also start to make LCDs? Will LCD futures really replace DLP splices?
However, with the increasingly fierce competition in the LCD splicing market in recent years, its profits have also become thinner and thinner. This is also a key factor for the traditional rear-projection manufacturers not focusing on the LCD market. Another important factor is the patchwork problem of LCD splicing. Although the stitching of LCD splicing has been continuously shrinking in recent years, it still cannot be compared with the rear projection. This also hinders the development of LCD splicing to more high-end markets.
The rear projection splicing is different. The rear projection splicing price system is more stable, more opaque, and the price will not easily change. This makes the rear projection splicing products more maneuverable, and the chances for the manufacturers to obtain profits are even greater. Therefore, traditional rear-projection manufacturers still attach great importance to the DLP market.
Although the price of DLP is much higher than that of LCD splicing, the seam stitching of a few millimeters of DLP splicing guarantees the integrity of the spliced ​​picture. For high-end industries such as traffic command centers and power dispatchers, such an advantage is LCD splicing. Unmatched. Even more critical is that such industry users have enough ability to pay.
In addition, due to the higher technical content of rear projection splicing products, the threshold for entry is relatively higher, which makes many companies that do not have strength to catch up, and can only go to the LCD market level. This also reflects from the side, such as the vicious competition in the LCD splicing market will not easily appear in the rear projection splicing market. In addition, the rear-projection splicing has been painstakingly managed for many years, and it has formed a very robust development system that allows it to firmly occupy the position of the market leader.
Through the above introduction, I believe that netizens have already answered the various questions asked at the beginning of the article. In fact, the fact that rear-projection makers are involved in LCD splicing does not mean that rear-projection is subject to neglect. This is just a way for manufacturers to increase their market competitiveness. The profitable space of the back-projection splicing market firmly holds back the hearts of the rear-projection splicing manufacturers, allowing them to carry out rear-projection splicing to the end.
From the "Yang Shanzhu Language" program, it can clearly distinguish between the effects of the front and back sides of the stage. On both sides of the mosaic effect, you can see there are black splicing bars, which can not be eliminated in the LED splicing; and the front of the stage background, the display effect as one, we see is a piece of screen.
The DLP splicing technique requires digital processing of the image signal before projecting the light. DLP stitching is currently the most stable and best-performing large-screen display device that can display a seamless large-screen display, just like the front-stage background effect of Spring Festival Evening.
Summary: In 2012, the CCTV Spring Festival Evening Stage met with everyone with a new look and immersive background effects to set off every program to achieve the ultimate effect. For the audience, the Spring Festival Gala is a visual feast. The application of large-screen display devices on the Spring Festival Evening in 2012 enabled more users to have a new understanding of the use of display devices. Whether it is LED splicing or projection technology or holographic technology, we believe that in the future market, more attention will be given to users.
Touchless Sensor-Makes it germ Free
Environment Friendly-Prevents Contamination
Ideal fit for Kitchen/Bathroom/Bedroom
As users hands or debris enter the zone 6 inches (15cm) from the infrared sensor on top of the dustbin, the lid will automatically open.
The Lid will remain open if hand or debris is within the 6 inch (15cm) range of the infrared sensor. Lid will close 7 seconds after users hands move away.
The new touch switch panel has higher stability and efficiency. you can use it effortlessly. There are [OPEN" & [CLOSE" buttons for manual operation, and there is a ON/OFF power switch on the back of the dustbin.
The new removable plastic rim is easy to lift out, and the plastic ring helps leave no excess plastic bag visible (w/o liner).
Two liners (30L+20L) for easy recycling
Features:
-100% [Hands-Free" operation.
-[Germ-Free"-Prevents cross-contamination
- Trash Bag Retainer Ring stops full, heavy bag from falling in and keeps bag ends neatly out of view
-Rubber feet keeps this trash can in place and protects floors from scratches
-Removable hard ABS plastic head for easy cleaning
-Uses 4 AA-Sized batteries 1.5V(LR6) (Not included)
-Low energy-consuming
-Multiple colors to satisfy your different requirements.
-Capacity:30L+20L
-Dimensions: 34W x 48 L x 64H CM
-1 Year Manufacturer`s Warranty included
Rectangular Sensor Automatic Dustbin 2-Compartment 30L+20L
Automatic Dustbin,Hand Sensing Dustbin,Hotel Dustbin,Environmental Dustbin
NINGBO ZIXING ELECTRONIC CO.,LTD. , https://www.zixingautobin.com