PConline evaluation has been about 14 years since the world’s first sweeping robot came out. Although the history of sweeping robots is shorter than that of black and white, it has occupied an extremely important position in the consumer’s family life. Since 2014, sweeping robots have entered a period of rapid growth. By 2015 and 2016, they have continued to develop fiercely in the fierce competition of many old and new brands. More and more consumers have expressed their recognition of intelligent sweepers.
This fun test is more of a demonstration of the “mutation†of sweeping robots and is not considered a rigorous test . However, in order to objectively rule out factors that may affect the outcome of the chaos, this time, PConline selected four price points. Similar sweeping robots, through a series of fun tests to show you some of the differences between them, hope that participating products can learn from each other's mindset to learn, we will start right away!
Fun Test Product Introduction
First of all, please allow the author to first introduce to you the four products that participate in the fun and indiscreet battle. Among them, these four products are relatively close in price, so that you can objectively eliminate some of the performance that may be caused by price differences. Performance difference.
Test product: Chi rabbit reference price: 1499 yuan
Chiba rabbit cleaning robot as a ZEBOT effort to build a new product in 2015, different from the circular design of traditional sweeping robots, hired American designers to customize it for home use products, its unique U-shaped design Personality, this design is easy to fit with the wall to ensure that the wall of garbage is clean.
Test Product: Proscenic JAZZ
Reference price: 1499 yuan
Proscenic robocleaner JAZZ is more satisfying both in appearance and function. The compact body can complete cleaning tasks more efficiently when dealing with more complex sweeping environments. So it can easily perform cleaning tasks for 120-180m2 large houses. Equipped with an intelligent control system: the latest international HSIR+ multi-point matrix intelligent system measures and intelligently plans the walking route to avoid random walks.
Test Products: Haier Pathfinder T520
Reference price: 1499 yuan
The Haier Pathfinder T520 has a striking sense of gold, silver and black on the outside. The compact design gives it the ability to sweep multiple dead angles. The subtle suction nozzle accurately resolves the sorbate. Not to mention its automatic back-charge, appointment cleaning, voice reminder, super anti-winding capabilities and other functions. In addition, Haier Pathfinder T520 sweeping robot bi-directional UV lamp, can effectively kill bacteria in addition to the characteristics of its great bright spot, suitable for home use.
Test Product: Proscenic COCO SMART 780T
Reference price: 2199 yuan
Proscenic COCOSMART 780T is a suction and drag machine, which is relatively compact in its overall appearance. Its body radius is 340mm and its thickness is 85mm. The compact body can complete cleaning tasks more efficiently when dealing with more complex sweeping environments. So it can easily perform cleaning tasks for 120-180m2 large houses. The battery uses a rechargeable 2500 milliliter iron lithium battery, supports 100 to 120 minutes of working time, Tesla power materials 18650 power core, but also based on the remaining power automatically inductive charging stand back, do not need to worry about no power.
In this fun test, we will place sweeping objects to allow the sweeping robots to sweep in the set environment and build obstacle mazes so that the sweeping robots can pass through to the finish line and that their running speeds are tested. From the fun test competition, they can see many important references such as their sweeping ability, obstacle escape ability and machine running test.
Time-limited cleaning competition
We first simulated a living environment of around 30 square meters and selected a variety of cleaning materials. Unevenly distributed on the wooden floor and under the sofa of the coffee table. Four sweeping robots were also tested in this simulation environment for 10 minutes to test the sweeper's weight on the sweeper. Through testing can see the performance of the sweeper in the actual environment and may encounter problems.
test environment:
Test Demonstration Video: (The video is accelerated for 2 minutes)
Chi rabbit performance:
Careful friends will find from the video that the Chiba rabbit has a good habit of walking to the edge of the home scene in the process of cleaning, and it also has its unique side in terms of collision prevention. There is also 4-5cm from the wall and furniture. Will be "braking" ahead of time! In the end, the result of the 10-minute limited sweep is 22g.
Proscenic JAZZ scores:
Proscenic JAZZ can use its bilateral brushes to guarantee Yanbian's sweeping ability. It can perform Yanbian sweeping in the indoor environment and sweeping back and forth in areas where there are more sweeping materials. The final score is 43g.
Haier Pathfinder T520 score:
Haier Pathfinder T520 can say that the face is “black†in this competition. In the 10-minute limited sweeping competition, Haier Pathfinder T520 was unfortunately stuck twice under the coffee table, but was stuck. Two times, but it is selected as the 2015 evaluation editor, it can still be cleaned to 18g.
Proscenic COCO SMART 780T scores:
Proscenic COCO SMART 780T has been in a state of quiet cultivation in the competition, but from the video can still be seen, it is still very good for the sweeping objects on the ground to clear, and finally get a score of 97g! Can be described as a "big food"!
Summary: In the limited-time sweeping competition, it can be found that although the wooden floor was made so dirty by the Xiao Bian, it only takes about 5 minutes. The sweeping robot has already basically cleaned the floor cleanly (whether it is the secret of cleaning the house at the same time) Do you use multiple sweepers?) Only a small part of the sweeper is left under the sofa. After 10 minutes, the entire environment can be cleaned by sweeping robots. In the test, it was found that the Haier Pathfinder T520 was stuck and sent a distress signal requiring manual correction, resulting in regrettably lagging behind in the final results. Eventually, the competition was won by Proscenic COCO SMART 780T!
Labyrinth obstacle escape game
Labyrinth escape test can fully demonstrate the escape ability of sweeping machine. This time we use wooden frame to build a small labyrinth so that sweeping robot can reach the end point. Among them, we will set up multiple checkpoints in the maze, including a 1cm-high carpet, a limited-width door that only allows the sweeping robot to pass, and a 90-degree direct turn to see if the sweeping robot can climb up through the height limit to reach the end.
Zhi Bun Demonstration Video:
Because of its good habit of “slow braking†in advance, the Smart Bunny always slows down more quickly than other players every time it approaches the fence, and loses its way through the carpet and widening the door. The score of the red line is 4 minutes and 37 seconds.
Proscenic JAZZ Demo Video:
Proscenic JAZZ looked a little “hesitant†when he climbed onto the carpet and decided to climb up the carpet after repeating a run back and forth. It can be seen that JAZZ can still climb the carpet easily, and it can also be used on wide-width doors and 90° bends. Relatively easy to pass, the final score was 3 minutes and 21 seconds.
Haier Pathfinder T520 Demo Video:
Maybe it is out of resignation to the last match, the Haier Pathfinder T520 seems to be very hard in this competition. Whether it is a carpet or a limited-width door, the Haier Pathfinder T520 has passed through easily, and the final line has passed. The score is 2 minutes and 35 seconds.
Proscenic COCOSMART 780T demo video:
Proscenic COCOSMART 780T may have eaten too much in the last round. In this competition, the rhythm is relatively slow, and the final score is 4 minutes and 38 seconds. (Hey, dare you dare to eat so full afterwards)
Summary: For this competition, we must first affirm the sportsman's spirit and willpower of the players, especially the Chih-Bunny rabbit. When climbing up the barrier rug, it will be a bit difficult, but after several attempts, it is finally successful. Barrier rug. Through this competition, we can think of the importance of the sweeper's ability to build maps. This time, the maze obstacles can escape the competition and can simulate all kinds of narrow and complex environments at home, and can fully test the escape ability of the sweeping robots. In the end, Haier Pathfinder T520 won the first place.
Sprint Competition
Sweeping robots are driven by motor-driven sweeping. A good sweeping robot should be equipped with a high-speed motor device, so that the sweeping robot has an efficient cleaning ability at work. The testing of this session will be different from the normal humanized functional testing, power consumption, and noise tests. From a certain point of view, the sweeping machine can also be considered a “carâ€, and in the usual sweeper testing, The speed of the sweeper is also rarely tested, and this time we decided to test the speed of the sweeper. Xiao Bian chose the distance of 4 tiles and recorded the time required for the sweeping robot from the starting point to the end point to determine the speed of sweeping robots.
Show video:
Summary: Through the competition, this link was won by Proscenic JAZZ with a score of 8 seconds and 09. However, it can be seen that JAZZ has a more obvious route inclination, which shows that there is still much room for improvement; and second place is Proscenic COCOSMART 780T. It is very close to the JAZZ score and eventually takes 14 seconds to finish in 8 seconds. The third place is the Haier Pathfinder T520, which takes 10 seconds to 04. However, the Chiba Rabbit has a good anti-collision and anti-collision habit due to its early deceleration. When the speed slowed down, it finally came in fourth place with 12 seconds and 14, but it can be seen that the running route of Chih-Bunny is almost a straight line, and it has a very good performance in terms of line inclination.
Finally, let's take a look at the results of each of the three fun competition tests. Everyone scored 4 points to 1 point for each item from the first to the fourth.
In the end, Proscenic JAZZ scored the first place with 10 points in three statistics, Proscenic COCOSMART 780T scored 8 points with 8 points, and the third was 7 points for Haier Pathfinder T520, while Zhibu Rabbit scored 4 points for 5 points. .
Editor's summary: To illustrate, the current chaos is not a rigorous test, so everyone can use a more relaxed and happy attitude! In the above-mentioned fun chaos, it can be seen that Proscenic JAZZ has a very balanced overall performance, but there is a slight sloping phenomenon when running straight; Proscenic COCOSMART 780T has an excellent cleaning ability and is a big eater among several sweepers. The Haier Pathfinder T520 has excellent escape ability and is far ahead in the labyrinth obstacle escape ability test. The Little Rabbit has left a deep impression on Xiaobian in terms of anti-collision ability. It can be said that this time, there was no loss of fun and fun, because the sweepers in the competition showed everyone their own unique characteristics and advantages. Although this was a competition, we ultimately focused not only on the results. The sweeping machine's fun is a big fight, we are more hope that we can find out the advantages of different brands of sweeping machines, learn from each other, so as to make the sweeper industry in the future to achieve better development.
PCD Drills used to drill through holes or blind holes in solid materials and to ream holes in existing holes. Commonly used drill bits mainly include twist drills, flat drills, center drills, deep hole drills and nest drills. Although reamer and boring drills cannot drill holes in solid materials, they are customarily classified as drill bits.
Our customers can depend on us for prompt, efficient response and quality products that attest to our expertise in engineering and manufacturing. As part of our scrupulous inspection procedure, we test 100% of our drills .375" and under for assembly integrity, leakage, and specified oil flow.
FEATURE:
1.Hardness PCD blanks more than 5000HV.
2. PCD Stone Milling cutters is maily used for High efficiency milling and depth character engraving on underside, grooving areas with good surface Roughness.
3.Top quality as world leading manufactuers, high abrasive resistance and with long service life.
4.big quantity in stock for ordering
PCD carving tool
PCD drills
Flexible in order quantity:
Samples can be provided before mass production, and MOQ can be discussed accordingly.
PRODUCT DETAIL:
PRODUCTING PROGRESS:
PAYMENT AND DELIVERY:
PRODUCT EQUIPMENT :
ABOUT US :
We are specialize in manufacturing PCD diamond tools and Carbide tools. Our major product inclulde PCD Inserts , PCD Reamers , PCD End Mills , PCD Taps, Cabide Inserts,Carbide Drills, Carbide Reams, Taps etc.,
We also offered customized cutting tools per drawings, and provide package according to customer requirements. We manufacture a series range of cutting tools for machining of Cast iron, Aluminium alloy and Non-Ferros metal, it is widely used in all major sectors like Automobiles, Engineering, Aerospace, Aviation and 3C industry. Premium quality of raw material is used in the production and strict examination during processing with advanced equipment, so our client are satisfied with our reliable quality and on-time delivery.
Our best selling of cutting tools include PCD Inserts, PCD End Mill, PCD Ball Nose Mill, PCD Reamer, Carbide Taps , Carbide End Mill, Special Form Cutter and many more. For these years we have been made a large forward in the technologies of manufacturing cutting tools. With high quality on performance and price, our product sells well both on domestic and overseas market. And we will always focus on the quality and best service, to make long business relationship.
quanlity control:
We have dedicated team of quality control and precise equipment to keep good and stable performance for our products and processing services.
PCD Drill Bit, PCD Drills, Carbide Drill Bit, End Mill Bit
OPT Cutting Tools Co., Ltd. , https://www.optdiamondtoolss.com