Design misunderstanding of LED lighting products

The difference between LED lighting products and traditional light sources lies in the way they emit light, the angle of illumination, and the heat of illumination.

So there is optics and heat dissipation design, but it is quite remarkable. Especially today's domestic practitioners are excessively pursuing the shadow and shape of traditional lighting, which is contrary to the unique characteristics of LED lighting products. !

1. In terms of heat dissipation shape, various traditional shape imitations bring bad heat dissipation, heat accumulation, and the consequences of premature light failure failure of the product!

2. In terms of optical appearance, various traditional shapes have brought about a serious reduction in light loss and color temperature and color rendering performance of the product!

3. In the power supply placement mode, simply use the built-in, all kinds of shoddy, resulting in capacitor burst, power drive temperature rise and damage to the end!

As for the first point, the heat dissipation design of the product must be analyzed in consideration of the various complex operating environments of the product, and it is not easy to ensure the quality of the product when our shell is tested in the factory!

As for the second point, the optical design of the LED product actually includes the circuit design of the product. The illumination effect of the LED application should not be simply what the cover, what shell can be easily solved!

In addition, some of the optical requirements for LED products are obviously too bad, but also the brightness and softness of the light and the product is likely to be small, which is obviously difficult to get!

As for the third point, as long as you have the intention to do well, you can do it. You don’t have to go into the way to develop what to do with capacitive drive, no capacitor drive, as long as it is a manufacturer with strength and talent, this design should be done well. The design is also the easiest, with some simple tests to ensure the set life of the product!

Of course, this can only be considered as a layer of skin, and many senior practitioners should be aware of these facts very early!