Wireless phone charger work with cell phone case DC 5V
what is wireless mobile phone charger?
Wireless charging (also known as "inductive charging") uses an electromagnetic field to transfer energy between two objects. This is usually done with a charging station. Energy is sent through an inductive coupling to an electrical device, which can then use that energy to charge batteries or run the device.
Â
Induction chargers typically use an induction coil to create an alternating electromagnetic field from within a charging base station, and a second induction coil in the portable device takes power from the electromagnetic field and converts it back into electrical current to charge the battery. The two induction coils in proximity combine to form an electrical transformer.Greater distances between sender and receiver coils can be achieved when the inductive charging system uses resonant inductive coupling.
Â
Â
Â
advantage of wireless mobile phone charger.
- Protected connections - no corrosion when the electronics are all enclosed, away from water or oxygen in the atmosphere.
- Safer for medical implants - for embedded medical devices, allows recharging/powering through the skin rather than having wires penetrate the skin, which would increase the risk of infection.
- Durability - Without the need to constantly plug and unplug the device, there is significantly less wear and tear on the socket of the device and the attaching cable.
- Â In comparison, Wireless Charger is safer than conventional cabled charger or external battery device. Conventional cable chargers have the risk of burning your portable phone due to current leak or over charging. External battery devices are often over-rated in its capacity, subject to size expansion, risk of explosion and have limited life span. Wireless Charger operates on the principle of electromagnetic power transportation controlled by IT sensory circuit. The charging process will stop automatically on reaching full capacity and therefore ensuring 100% safety. Â
Features:
 1.Three induction coils insideÂ
2.Smart charging with overcharge and overheating protection, care for your battery
3.Convenient charging without plugging wire and connector trouble
Item,FP-WCP010Â Qi wireless charger
Color:White,Red,Black
In-put:5V-1A
Out-put:5V-500~1000mah
Size,138*85*80 mm
Net Weight,90g
Material,ABS+Stainless Mirror+Non-slip rubber ring
Size (box),200*110*55 mm (blister+card)
Weight   (One set),80g
Packing lsit (One set) Charger,USB,Introduction,Guarantee
Package,20 sets /carton
Socket Type,UK,US,EU and CN standard
Â
What phones can it charge?
Samsung Galaxy S4, S3, Note II, iPhone 4/4S,Note 3,Note2, iPhone 5,5s  , HTC,Qi-enabled smart phones.
Â
Business cooperation models:
A) OEM, ODM, EMS: MOQ 1000 PCS, Customer Logo
B) Whole distribution: MOQ 100 PCS, Neutral Packing/AFD Wispe Logo
C) Small business: MOQ 10 PCS, AFD Wispe Logo
Â
Delivery methods:
1) Express for small order
2) Sea shipment for bulk order
Â
Â
Payment methods:
1) Sample: T/T,paypal,wester union.
2)Â Small:Â 100% T/TÂ down payment
3) Bulk:  20% T/T down payment, balance after checking goods an before shipment
Â
Factory Audit:Â Â
We accept customer's request on factory audit, and welcome your visit.
Â
Â
Â
Saitake electronics(hk) Â
 Â
Wireless phone charger work with cell phone case DC 5V
what is wireless mobile phone charger?
Wireless charging (also known as "inductive charging") uses an electromagnetic field to transfer energy between two objects. This is usually done with a charging station. Energy is sent through an inductive coupling to an electrical device, which can then use that energy to charge batteries or run the device.
Â
Induction chargers typically use an induction coil to create an alternating electromagnetic field from within a charging base station, and a second induction coil in the portable device takes power from the electromagnetic field and converts it back into electrical current to charge the battery. The two induction coils in proximity combine to form an electrical transformer.Greater distances between sender and receiver coils can be achieved when the inductive charging system uses resonant inductive coupling.
Â
Â
Â
advantage of wireless mobile phone charger.
- Protected connections - no corrosion when the electronics are all enclosed, away from water or oxygen in the atmosphere.
- Safer for medical implants - for embedded medical devices, allows recharging/powering through the skin rather than having wires penetrate the skin, which would increase the risk of infection.
- Durability - Without the need to constantly plug and unplug the device, there is significantly less wear and tear on the socket of the device and the attaching cable.
- Â In comparison, Wireless Charger is safer than conventional cabled charger or external battery device. Conventional cable chargers have the risk of burning your portable phone due to current leak or over charging. External battery devices are often over-rated in its capacity, subject to size expansion, risk of explosion and have limited life span. Wireless Charger operates on the principle of electromagnetic power transportation controlled by IT sensory circuit. The charging process will stop automatically on reaching full capacity and therefore ensuring 100% safety. Â
Features:
 1.Three induction coils insideÂ
2.Smart charging with overcharge and overheating protection, care for your battery
3.Convenient charging without plugging wire and connector trouble
Item,FP-WCP010Â Qi wireless charger
Color:White,Red,Black
In-put:5V-1A
Out-put:5V-500~1000mah
Size,138*85*80 mm
Net Weight,90g
Material,ABS+Stainless Mirror+Non-slip rubber ring
Size (box),200*110*55 mm (blister+card)
Weight   (One set),80g
Packing lsit (One set) Charger,USB,Introduction,Guarantee
Package,20 sets /carton
Socket Type,UK,US,EU and CN standard
Â
What phones can it charge?
Samsung Galaxy S4, S3, Note II, iPhone 4/4S,Note 3,Note2, iPhone 5,5s  , HTC,Qi-enabled smart phones.
Â
Business cooperation models:
A) OEM, ODM, EMS: MOQ 1000 PCS, Customer Logo
B) Whole distribution: MOQ 100 PCS, Neutral Packing/AFD Wispe Logo
C) Small business: MOQ 10 PCS, AFD Wispe Logo
Â
Delivery methods:
1) Express for small order
2) Sea shipment for bulk order
Â
Â
Payment methods:
1) Sample: T/T,paypal,wester union.
2)Â Small:Â 100% T/TÂ down payment
3) Bulk:  20% T/T down payment, balance after checking goods an before shipment
Â
Factory Audit:Â Â
We accept customer's request on factory audit, and welcome your visit.
Â
Â
Â
Saitake electronics(hk) Â
 Â
With Volvo Engine Diesel Generator
With Volvo Engine Diesel Generator,Volvo Diesel Generator,Volvo Generator,Volvo Power Generator
Shanghai Kosta Electric Co., Ltd. , https://www.ksdgenerator.com