Waterproof Optional SMD 2835 5050 LED Flex Flexible Strip Light

   1.Led strip with using high quality Epistar or Sanan chips, gold line, copper bracket, low-light failure, long life span.
2. For the white color, 3 grades of led chips are optional: 16-18lm/CRI>70, 22-24lm/CRI>80, 18-20lm/CRI>90
For RGB LEDs, 1500-2000mcd and 2000-2500mcd are optional.
3. 8 color temperature sections are optional: 2200-2400K, 2400-2600K, 2600-2800K, 2800-3000K, 3000-3200K, 4000-4500K, 5000-5500K, 5500-6500K.
 1. Min Cuttable Length is 5CM, led strip length control by yourself.
2. Superior and heat-resistant 10mm PCB.
3. The real 3M adhesive backed tape, strong viscosity, not easy to fall.
 
RGB led strip widely used in cove lighting, architectural lights for canopy, corridor, Archway, backlight or edge lighting for signage, DIY lights for home use.


 We have a strict quality control system from raw material to finished led strips.Each step must pass strict inspection, strive to produce superior products:
1.Incoming Raw Material Inspection

Comparing incoming raw material and sealed sample in terms of class, quality grade, technical data, ensuring the consistency with purchasing requirements, thus guarantee the ensuing manufactured product fulfilling customers' requirements.

2.Led Drying

Leds will absorb humidity when exposed to air, which requires 24H drying before SMD.

3.Light-on Test after SMD

After pasting of leds onto the PCB board, each strip panels will be powered to see if any insufficient soldering, slanted leds, and dead leds, if yes, they have to be repaired until qualified; if no, then flowing to the next stream.

4.Light-on and beating test

Strips after SMD (0.5M) should be soldered to 5M roll, after which they have to be lighted again to check if any dead leds, and together with beating test to see if leds fixed tight on pcb board

5.Aging Test

Finished products must undergo at least 8 hours' aging test 100%

6.Light-on test of finished product

Finished product, before packing, must be lighted again after aging to check if any dead leds.

7.Pre-shipment Inspection

Proofing finished product with customers' requirements again before shipment, to ensure the consistency of products with customers' needs.
 
Flexible strip with reel, Anti-static foil bag, Carton box
Delivery Detail: Shipped in 7 days after payment

1.Less than 45 KGS, we will send by express. (Door to Door, Convenient).

2.Between 45 - 200 KGS, we will send by air transport. (Fastest and safest, but expensive).

3.More than 200 KGS, we will send by sea. (Cheapest and usual)

@-1, 140m/W high luminous efficacy strip are high save energy type, idear for indoor and outdoor application.

@-2, available for IP64, IP65, IP67.


 
Our products are popular in india, turkey,Vietnam,Malaysia,the Middle East and southeast Asia, As a team of experienced professionals in the field of 3D letter series machine, we wdeliver the best solutions for companies producing the work, such as channel letter, wood furniture. small gift industry and so on. we are directly manufacture. we have our own production line. competitive price and creadible service all the time.

Our success depends on entirely on the satisfaction of our customers. Ensuring that you are completely happy and comfortable with your machine is always our first priority. we work tirelessly to make sure that your experience with our work is always both professional.
   1.Led strip with using high quality Epistar or Sanan chips, gold line, copper bracket, low-light failure, long life span.
2. For the white color, 3 grades of led chips are optional: 16-18lm/CRI>70, 22-24lm/CRI>80, 18-20lm/CRI>90
For RGB LEDs, 1500-2000mcd and 2000-2500mcd are optional.
3. 8 color temperature sections are optional: 2200-2400K, 2400-2600K, 2600-2800K, 2800-3000K, 3000-3200K, 4000-4500K, 5000-5500K, 5500-6500K.
 1. Min Cuttable Length is 5CM, led strip length control by yourself.
2. Superior and heat-resistant 10mm PCB.
3. The real 3M adhesive backed tape, strong viscosity, not easy to fall.
 
RGB led strip widely used in cove lighting, architectural lights for canopy, corridor, Archway, backlight or edge lighting for signage, DIY lights for home use.


 We have a strict quality control system from raw material to finished led strips.Each step must pass strict inspection, strive to produce superior products:
1.Incoming Raw Material Inspection

Comparing incoming raw material and sealed sample in terms of class, quality grade, technical data, ensuring the consistency with purchasing requirements, thus guarantee the ensuing manufactured product fulfilling customers' requirements.

2.Led Drying

Leds will absorb humidity when exposed to air, which requires 24H drying before SMD.

3.Light-on Test after SMD

After pasting of leds onto the PCB board, each strip panels will be powered to see if any insufficient soldering, slanted leds, and dead leds, if yes, they have to be repaired until qualified; if no, then flowing to the next stream.

4.Light-on and beating test

Strips after SMD (0.5M) should be soldered to 5M roll, after which they have to be lighted again to check if any dead leds, and together with beating test to see if leds fixed tight on pcb board

5.Aging Test

Finished products must undergo at least 8 hours' aging test 100%

6.Light-on test of finished product

Finished product, before packing, must be lighted again after aging to check if any dead leds.

7.Pre-shipment Inspection

Proofing finished product with customers' requirements again before shipment, to ensure the consistency of products with customers' needs.
 
Flexible strip with reel, Anti-static foil bag, Carton box
Delivery Detail: Shipped in 7 days after payment

1.Less than 45 KGS, we will send by express. (Door to Door, Convenient).

2.Between 45 - 200 KGS, we will send by air transport. (Fastest and safest, but expensive).

3.More than 200 KGS, we will send by sea. (Cheapest and usual)

@-1, 140m/W high luminous efficacy strip are high save energy type, idear for indoor and outdoor application.

@-2, available for IP64, IP65, IP67.


 
Our products are popular in india, turkey,Vietnam,Malaysia,the Middle East and southeast Asia, As a team of experienced professionals in the field of 3D letter series machine, we wdeliver the best solutions for companies producing the work, such as channel letter, wood furniture. small gift industry and so on. we are directly manufacture. we have our own production line. competitive price and creadible service all the time.

Our success depends on entirely on the satisfaction of our customers. Ensuring that you are completely happy and comfortable with your machine is always our first priority. we work tirelessly to make sure that your experience with our work is always both professional.

72v20Ah Lithium Ion Battery

72V20Ah Lithium Ion Battery,Electric Scooter Lifepo4 Battery Pack,Lithium Battery For Electric Motorcycle,Lithium Battery For Electric Bike

Jiangsu Zhitai New Energy Technology Co.,Ltd , https://www.zt-tek.com