According to the data released by the Ministry of Industry and Information Technology yesterday, the outdated production capacity of flat glass will be 26 million weight boxes in 2011. At the same time, the blind investment in some places in the recent period has caused the flat glass industry's production capacity to grow too fast. The Ministry of Industry and Information Technology issued relevant notices yesterday, demanding that effective measures be taken to resolutely curb the momentum of excessive growth in production capacity.
The above notification requires that all projects under construction in the region be thoroughly cleaned up, and that it is necessary to resolutely contain non-compliance with the “Notice of the State Council Approved by the Development and Reform Commission and Other Departments on Suppressing Overcapacity in Some Industries and Duplicate Construction to Guide the Healthy Development of Industries†and the “Table Glass Industryâ€. As for the construction projects stipulated in the "Entry Conditions", new flat glass construction projects must be approved by the competent national authorities.
At the same time, the notice also stated that it will promptly coordinate with the investment, land, environmental protection and finance departments of the same level to strictly control the proposed project, strictly control the new production capacity, and guide the healthy development of the industry.
According to the data released in this notice, in 2011, the obsolete capacity of flat glass will be eliminated by 26 million weight boxes.
The Ministry of Industry and Information Technology also said that it will guide leading companies to implement cross-regional cross-sector mergers and reorganizations, reduce redundant construction, extend the industrial chain, increase product value, and develop in the direction of integration of raw material preparation, glass production, and deep processing. During the “Twelfth Five-Year Plan†period, through the merger and reorganization, the glass deep processing rate was gradually increased to more than 45%, and the proportion of flat glass production capacity of the top 10 companies in the total production capacity increased to over 75%.
In addition, the Ministry of Industry and Information Technology also requested that the operation of the glass and products industry in the region in the first quarter of 2011 be reported to the Ministry by May 20, and be submitted to the Department on a regular basis 20 days before February, May, August and November of each year. Regional glass and product industry operations in the previous quarter.
It is understood that 34 new flat glass production lines were added in 2010, with an additional capacity of 130 million weight boxes, and the national flat glass production capacity has reached 890 million weight boxes. In 2010, the output of flat glass was 630 million weight boxes, and the capacity utilization rate has dropped to around 70%. At present, there are more than 30 production lines under construction or proposed to be built, and the capacity to be released will be as high as 100 million weight boxes. The repeated construction of the flat glass industry is serious, and the overcapacity has been highlighted.
According to a report released recently by Guosen Securities, from the perspective of product structure, there is a serious imbalance in the domestic glass production capacity, and the supply of middle and low-grade glass is seriously oversupply, while the downstream deep processing and technology represented by ultra-white translucent glass, TCO glass, and electronic glass substrates, etc. The high content of glass products is relatively short, it is difficult to meet the needs of the domestic processing glass market, a large number of products need to be imported from abroad, industrial upgrading needs to be strengthened.
The above notification requires that all projects under construction in the region be thoroughly cleaned up, and that it is necessary to resolutely contain non-compliance with the “Notice of the State Council Approved by the Development and Reform Commission and Other Departments on Suppressing Overcapacity in Some Industries and Duplicate Construction to Guide the Healthy Development of Industries†and the “Table Glass Industryâ€. As for the construction projects stipulated in the "Entry Conditions", new flat glass construction projects must be approved by the competent national authorities.
At the same time, the notice also stated that it will promptly coordinate with the investment, land, environmental protection and finance departments of the same level to strictly control the proposed project, strictly control the new production capacity, and guide the healthy development of the industry.
According to the data released in this notice, in 2011, the obsolete capacity of flat glass will be eliminated by 26 million weight boxes.
The Ministry of Industry and Information Technology also said that it will guide leading companies to implement cross-regional cross-sector mergers and reorganizations, reduce redundant construction, extend the industrial chain, increase product value, and develop in the direction of integration of raw material preparation, glass production, and deep processing. During the “Twelfth Five-Year Plan†period, through the merger and reorganization, the glass deep processing rate was gradually increased to more than 45%, and the proportion of flat glass production capacity of the top 10 companies in the total production capacity increased to over 75%.
In addition, the Ministry of Industry and Information Technology also requested that the operation of the glass and products industry in the region in the first quarter of 2011 be reported to the Ministry by May 20, and be submitted to the Department on a regular basis 20 days before February, May, August and November of each year. Regional glass and product industry operations in the previous quarter.
It is understood that 34 new flat glass production lines were added in 2010, with an additional capacity of 130 million weight boxes, and the national flat glass production capacity has reached 890 million weight boxes. In 2010, the output of flat glass was 630 million weight boxes, and the capacity utilization rate has dropped to around 70%. At present, there are more than 30 production lines under construction or proposed to be built, and the capacity to be released will be as high as 100 million weight boxes. The repeated construction of the flat glass industry is serious, and the overcapacity has been highlighted.
According to a report released recently by Guosen Securities, from the perspective of product structure, there is a serious imbalance in the domestic glass production capacity, and the supply of middle and low-grade glass is seriously oversupply, while the downstream deep processing and technology represented by ultra-white translucent glass, TCO glass, and electronic glass substrates, etc. The high content of glass products is relatively short, it is difficult to meet the needs of the domestic processing glass market, a large number of products need to be imported from abroad, industrial upgrading needs to be strengthened.
6000Puffs Disposable Vape,6000Puff Vape Pod,E-Cigarette Vape Device,Original R&M 6000Puffs
Shenzhen Uscool Technology Co., Ltd , https://www.uscoolvape.com