TDA2030 is an audio power amplifier circuit produced by Telefunken, which adopts a V-shaped 5-pin single in-line plastic packaging structure. As shown in Figure 1, according to the shape of the lead can be divided into H-type and V-type. The integrated circuit is widely used in car stereo receivers and recorders, medium-power audio equipment, and has the characteristics of small size, large output power and low distortion. And has an internal protection circuit. Italian SGS company, American RCA company, Japanese Hitachi company, NEC company, etc. have all produced similar products. Although their internal circuits are slightly different, the pin positions and functions are the same and can be interchanged. |
Circuit characteristics: [1]. Very few external components. [2]. The output power is large, Po = 18W (RL = 4Ω). [3] .Using ultra-small package (TO-220), can improve the assembly density. [4]. The impact of starting is minimal. |
[5]. Contains various protection circuits, so the work is safe and reliable. The main protection circuits are: short-circuit protection, thermal protection, accidental open circuit of the ground wire, reverse polarity of the power supply (Vsmax = 12V), and load dump voltage kickback. Typical application circuit: |
TDA2030 limit parameters: |
TDA2030 limit parameters | |||||||||
parameter name | Limit value | unit | |||||||
Power supply voltage (Vs) | ± 18 | V | |||||||
Input voltage (Vin) | Vs | V | |||||||
Differential input voltage (Vdi) | ± 15 | V | |||||||
Peak output current (Io) | 3.5 | A | |||||||
Dissipated power (Ptot) (Vdi) | 20 | V | |||||||
Working junction temperature (Tj) | -40- + 150 | ℃ | |||||||
Storage junction temperature (Tstg) | -40- + 150 | ℃ |
Precautions: TDA2030 has a load dump voltage kickback protection circuit. If the peak voltage of the power supply voltage is 40V, then an LC filter must be inserted between pin 5 and the power supply to ensure that the pulse train on pin 5 is maintained within the specified amplitude. Thermal protection: Thermal limiting protection has the following advantages, it can easily withstand the overload of the output (even for a long time), or protect the environment when the ambient temperature exceeds. Compared with ordinary circuits, heat sinks can have a smaller safety factor. If the junction temperature is exceeded, there will be no damage to the device. If this happens, Po = (and of course Ptot) and Io will be reduced. Printed circuit board design must better consider the decoupling of the ground wire and the output, because these lines have a large current through. No insulation is needed between the heat sink and the assembly. The lead length should be as short as possible. The soldering temperature should not exceed 260 ° C for 12 seconds. Although the TDA2030 requires few components, the components selected must be quality-assured components. |
Follow WeChat
Download Audiophile APP
Follow the audiophile class
related suggestion
Avago Introduces New High Linear Power Amplifier Module Product Avago Technologies ...
TDA2030 stereo power amplifier is mainly integrated circuit TDA2030a ...
TDA2616 application circuit
The circuit is shown in Figure 1. The chip IC uses the LM1875 of the American NS company, which has a soft tone and low distortion (0.015% ...
The word "Monster" has both positive meaning and ...
When the output power of the digital power amplifier is greater than 50W, it is impossible to use only ...
If an "audiophile" is a group of people who are never satisfied with the sound and "loved the new and the old" with the audio equipment. Then just rely on these so-called "fever spirits" ...
First, the circuit principle and characteristics 1. Power amplifier part (see Figure 1)
There is a well-known saying in the Hi-Fi world that is "briefness first." This means that if ...
Simple and practical TDA2822M integrated power
STK465 thick film ...
TDA2009 is a relatively common and affordable high-fidelity amplifier integrated block. Rated work ...
TDA2030 is a Hi-Fi amplifier integrated block used in many computer active speakers. It is easy to connect and affordable. Rated power is 1 ...
This RF power amplifier can output 2-3 channel signals, covering an area of ​​about one square kilometer, is ...
Low frequency power amplifier
Looking at the Hi-Fi amplifiers currently on the market, the output power is 100W ...
With the newly launched LM4651 and LM465 from National Semiconductor ...
EL34 (6CA7) was first launched by Philips in 1956 ...
This article cleverly combines the electronic tube EL34 and the transistor (op amp), ...
The pre-amplifier adopts a European-made TESLA brand low noise high cheek double transistor ...
"Simple" means the circuit of the amplifier is simple, making it easier, as long as the picture ...
1. Description: & nb ...
The Class A transistor power amplifier has a warm and sweet tone, which makes people tempted. But the temperature rise of Class A amplifier ...
The circuit is shown in Figure 5, ...