I. Project introduction
The electrical part of the project was participated in the design, wiring, and debugging by our company. Using a variety of Delta products as well as the reject controller independently developed by our company, the automatic detection and control of pressure and slice weight deviations was effectively achieved, and the customer's Booking requirements.
The overall device is shown below:
The layout of the equipment in the power cabinet is as follows:
Separate type cabinet as shown below:
Second, the main system configuration
Third, the system requirements
1. Production requirements: 500,000 tablets per hour;
2. Tablet weight: The difference in tablet weight is controlled within ± 4%;
3. Waste control: The rejection accuracy is over 98%;
Fourth, interface introduction
Operation main interface:
The pressure value of each station is displayed, and the maximum and minimum pressures and the deviation from the set pressure are selected. With reference to this item, the upper and lower limits of reject can be set.
When the system is abnormal, an icon will be displayed in the upper right corner of each screen. Click this icon to enter the following screen. The abnormal item “normal†will become flashing. Click this button to inform the way of troubleshooting and troubleshooting. Press Reset to operate normally.
Hongkong Onice Limited , https://www.osbvapepen.com