Shanghai, September 23, 2014 - When you walk into a Chinese ceramics factory, you often find that the equipment inside the factory is covered with some white dust. Due to the special processing and technical requirements of ceramic processing, a large number of cutting and grinding of ceramic tiles not only require a heating process, so that the temperature inside the factory is high, and dust is easily generated, which will cause long-term production equipment in which to break life. Factory managers often complain about inverters and other equipment with high failure rates, affecting cost expenditures and normal production schedules.
In such a relatively harsh production environment, frequent failures are also reasonable. In terms of only the inverters required, it must have high temperature resistance, dust resistance, and electrical conductivity, so as not to affect normal operation due to poor environment and shorten the life cycle. The question is, in the numerous and varied inverter brands and types, how can we really find a suitable working environment environment for China's general machinery, stable and reliable performance, and convenient and easy to use products? It needs to know the eye.
Schneider Electric's newly introduced Rui-Yi series ATV310 general-purpose inverter is such a product tailored to Chinese users' needs and habits, which can solve the worries of poor operating conditions for many similar factory managers. It is suitable for general machinery equipment such as machine tools and transmissions, especially for high-dust and multi-cotton textile machinery and ceramic machinery applications.
Three Highlights Design Durability The ATV310 drive uses three bright spot designs to challenge harsh environmental limits:
First, the circuit boards are all reinforced with coating treatment, and the innovative design makes the cooling air not pass through the circuit board, and will not affect the normal use due to excessive accumulation of dust and oil.
Second, the ATV310 drive can be rated for operation within 55 degrees of operating temperature without derating. When the internal temperature is high, an overheat alarm will be triggered to remind you to clean the radiator or check if the internal fan is blocked due to too much accumulation of dust, cotton, etc.
Third, it also possesses superior anti-power grid fluctuation capability, anti-lightning capability, and anti-electromagnetic interference capability, and can cope with common grid instability problems. The reliable performance of the ATV310 drive, even in response to a variety of environmental challenges can be durable, but also reduces the time and energy plant managers to maintain the product.
On-demand small and easy-to-use In the factory environment, the frequency converter usually settles in the power distribution cabinet of the factory. In order to free up more space to expand workers' operating area and place production equipment, this requires that the frequency converter must be compact, save space, and be easy to operate and maintain. The design of ATV310 frequency converter also fully considered this requirement. Its internal compact structure, especially the self-cooling design of the two power stages of 0.37kw and 0.75kw makes the ruler very compact and supports side-by-side installation.
When you need to install the ATV310 inverter, the panel's various operation buttons and instructions are marked in Chinese, and the parameters are displayed in 7-segment digits, which is more intuitive and clear to Chinese users. There is a quick start guide and a complete list of parameters in the box. The inverter body has a clear power terminal label. Open the inside of the cover, you can find the wiring diagram of the power terminal and the control terminal, which allows the operator to quickly install the wiring. No need to read the product manual again.
When used, plug-and-play software design and short menu design, you only need to set a few key parameters to run on power. The ATV310 frequency converter also has built-in Modbus communication protocol, can well integrate into user's original automation system, and communicate with PLC.
We provide quick-turn injection molding by many types of materials, like ABS, PA66, PBT, TPU, TPE, PVC, PE, NYLON 6, PC, silicone, TPE, EPDM, PUR, etc. Special for some plastic parts. Our advantages in internal prototyping, bridge tooling and short-run manufacturing, which can eliminate the costly and time-consuming for customers a lot.
After customer approved 3D drawing, we can test it by 3D printer first, then move on for formal tooling once confirmed ok. And all related materials, logo, color or finishes can be chosed as customers' requirement.
Injection Molding Parts,Plastic Injection Molding,Low Cost Plastic Injection Molding,Plastic Mold Injection Molding
ETOP WIREHARNESS LIMITED , https://www.etopwireharness.com