Description:
The fibers,250um,are postioned in a loose tube made of a high modulus plastic.The tubes are filled with a water-resistant filling compound.A Fiber Reinforced Plastic(FRP) locates in the center of core as non-metallic strength member.The tubes(and fillers)are stranded around the strength member into a compact and circular core. After an Aluminum Polyethylene Laminate(APL)moisture barrier is applied around the cable core, the cable is completed with a PE sheath.
Features:
1. Good mechanical and temperature performance
2. High strength loose tube that is hydrolysis resistant
3. Special tube filling compound ensure a critical protection of fiber
4. Loose tubes filling compound
5. Crush resistance and rlesxibility
6. The following measures are taken to ensure the cable water tight
7. Single fiber reinforoad plastic as the central strength member
8.100% cable core filling
9. Aramid yarn strength member ensure good performance of tensile strength
Telephone: 0086-13065800671
Web: Www. Chinagyd. COM
| optical characteristics | |||||
| Â | Â | Â | Â | Â | Â |
| Â | Â | G.652 | G.655 | 50/125um | 62.5/125um |
| attenuation(+20ºC) | @850nm |  |  | ≤3.0db/km | ≤3.0db/km |
| @1300nm |  |  | ≤1.0db/km | ≤1.0db/km | |
| @1310nm | ≤0.36db/km | ≤0.4db/km |  |  | |
| @1550nm | ≤0.22db/km | ≤0.23db/km |  |  | |
| @850nm |  |  | ≤600mhz.km | ≤200mhz.km | |
| bandwidth(class A) | @1300nm |  |  | ≥1200mhz.km | ≥600mhz.km |
| numerical Aperture |  |  |  | 0.200±0.015na | 0.275±0.015na |
| cable cut-off waveleng th xcc |  |  |  | ≤1620nm | ≤1450nm |
| storage/operating temperature:-40ºC to +70 | |||||
Description:
The fibers,250um,are postioned in a loose tube made of a high modulus plastic.The tubes are filled with a water-resistant filling compound.A Fiber Reinforced Plastic(FRP) locates in the center of core as non-metallic strength member.The tubes(and fillers)are stranded around the strength member into a compact and circular core. After an Aluminum Polyethylene Laminate(APL)moisture barrier is applied around the cable core, the cable is completed with a PE sheath.
Features:
1. Good mechanical and temperature performance
2. High strength loose tube that is hydrolysis resistant
3. Special tube filling compound ensure a critical protection of fiber
4. Loose tubes filling compound
5. Crush resistance and rlesxibility
6. The following measures are taken to ensure the cable water tight
7. Single fiber reinforoad plastic as the central strength member
8.100% cable core filling
9. Aramid yarn strength member ensure good performance of tensile strength
Telephone: 0086-13065800671
Web: Www. Chinagyd. COM
| optical characteristics | |||||
| Â | Â | Â | Â | Â | Â |
| Â | Â | G.652 | G.655 | 50/125um | 62.5/125um |
| attenuation(+20ºC) | @850nm |  |  | ≤3.0db/km | ≤3.0db/km |
| @1300nm |  |  | ≤1.0db/km | ≤1.0db/km | |
| @1310nm | ≤0.36db/km | ≤0.4db/km |  |  | |
| @1550nm | ≤0.22db/km | ≤0.23db/km |  |  | |
| @850nm |  |  | ≤600mhz.km | ≤200mhz.km | |
| bandwidth(class A) | @1300nm |  |  | ≥1200mhz.km | ≥600mhz.km |
| numerical Aperture |  |  |  | 0.200±0.015na | 0.275±0.015na |
| cable cut-off waveleng th xcc |  |  |  | ≤1620nm | ≤1450nm |
| storage/operating temperature:-40ºC to +70 | |||||
WARNING!
Do not plug two or more meters together!
IMPORTANT
Don't plug in an appliance where the load exceeds 16 Amp. Always ensure the plug of any appliance is fully inserted into the meter outlet. If cleaning of the meter is required, remove from mains power and wipe meter with a dry cloth.
KEYBOARD DEFINITION
1). SET: Set price with button UP.
2). MODE: Exchange display state.
3). UP: Set price combined with button SET.
GENERAL FEATURES
1).Display line power.
2).Display and memory accumulative total power quantity.
3).Display and memory total power charge of price.
THE DATA DISPLAY
Press MODE button the data displays as follows:
W →KWh →PRICE →COST/KWH
↑_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _↓
1). Plug in socket and power on, the meter will display real power.
2). Press MODE button once again and release, the meter will display accumulative KWh.
3). Press MODE button once again and release, the meter will display total power charge.
4). Press MODE button once again and release, the meter will display COST/KWH.
SETTING PRICE OF COST/KWH
1). Press SET button during display COST/KWH,the first digital COST/KWH flash, press UP button to set it.
2). Press SET button once again and release, the second digital COST/KWH flash, press UP button to set it.
3). Press SET button once again and release, the third COST/KWH flash, press UP button to set it.
4). Press SET button once again and release, the fourth COST/KWH flash, press UP button to set it.
5). Press SET button once again and release, the radix point COST/KWH flash, press UP button to set it.
DATA CLEAR
Press and hold MODE button for 5 seconds will clear KWH,PRICE and COST/KWH data.
Power Meter Plug Energy Monitor,Backlight Power Metering Socket,Blue Backlight Power Meter Socket,Multi-functional Backlight Power Meter Socket
NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsockets.com