Although there is no exact news about when the hammer T3 will be released, the various rumors about the aircraft have already been hot on the Internet. A few days ago, after the suspected hammer T3 won the 3C certification, another netizen released the front spy photos of the hammer T3 on Weibo. Its shape is very close to the front panel we have seen in the past. It has a narrow border and adopts a circle. Shaped Home button and integrated fingerprint recognition, but there is no more information in terms of specifications.
Positive spy leak
Compared with the previously leaked hammer T3 real machine photos, the front spy photos on this microblog are much more clear, and from the frontal appearance, it is indeed the last shot of the new machine front panel we saw. Very close, such as with an ultra-narrow bezel design, the black edge is also controlled, and the forehead part of the phone seems to integrate the sensor into the handset, with a front lens on the left.
In addition, the spy photos of this exposure show again that the hammer T3 will be designed with a rounded Home button, and also incorporates a fingerprint recognition function, which is confirmed from the fingerprint unlock screen appearing in spy photos. However, there are no related specifications for the hammer T3 yet, but from the perspective of the ratio of the palm to the body in the spy shot, it is possible to have a 5.5-inch or 5.7-inch touch screen.
Equipped with Snapdragon 821
According to the information disclosed by netizens in the past, the hammer T3 will be released in two major versions, one is a 5.2-inch touch screen, supports 1080p resolution, one is a 5.7-inch touch screen, and the resolution is upgraded to 2K. So if it is not unexpected, if the spy shot of this exposure is indeed the hammer T3, then it should be the high-end version of the big screen, that is, it will be equipped with the Snapdragon 821 processor, and provide 6GB of memory and a larger capacity battery.
As for the 5.2-inch version of the hammer T3, it is possible to carry the Snapdragon 820 processor, have 4GB of memory, and the battery capacity will be smaller. At the same time, combined with the current model of the hammer T3, the hammer SM919 with 3C certification may be a high-end version of the 5.7-inch screen. In the past, the hammer SM901 leaked on Weibo may be the standard version of the 5.2-inch screen. The information exposed at the time was also the Snapdragon 820 processor and the memory capacity of 4GB RAM.
Or will be released in October
Of course, the above statements are all speculations based on the existing information, but the hammer T3 will be released in two versions, but it should be more likely. According to industry analyst @潘ä¹å ‚, the hammer T3 will have two versions, and said that one is already in small batch production, and the other will be mass production in September. At the same time, the industry analyst also said that "you have a few hits on the road, big screen and small screen top with all the standard."
However, at present, Hammer Technology has not carried out any publicity pre-heating of the new machine, and the news of the release on September 7th has also been revealed due to the exposure of the suspected internal mail, and the display conference has been postponed. It is expected that it will be until October. Will meet with us.
303/304/501 Switch Lines,Data Transmission Line,Usb To Micro Charging Line,Usb-C Charging Line
ShenZhen Puchen Electronics Co., Ltd. , https://www.szpuchen.com