Today's headlines
Recently, Germany's largest trade union organization said that any buyer who wants to acquire Osram must ensure the employment of existing employees and the continuous operation of the factory, and guarantee the independence of future operations.
As of the end of last year, OSRAM had a total of 33,000 employees. At present, Jinshajiang Investment and Sanan Optoelectronics have confirmed their contact with Osram.
hot news
1. Car LED lighting is the beginning of a fierce battle.
Recently, Osram successfully completed the acquisition of Novità Technologies, a US automotive LED module manufacturer, which will further expand its position in the US automotive LED market. It is estimated that by 2020, the global LED car headlight module market will grow at a rate of 20% per year.
2. Adjusting the LED lighting product portfolio is the trend this year.
Recently, Wu Qinghui, chairman of Dongbei Optoelectronics, said that in order to avoid price competition with Chinese manufacturers on LED bulbs, the production capacity of bulbs will be gradually reduced (from 10 million to 3 million per month). Increase the product portfolio with profit protection.
3, it seems that there should be coups for the price increase in the middle and upper reaches
Foshan Lighting released a forecast for its performance. In the context of the macroeconomic downturn and rising prices of raw materials such as upstream chips and packaging, the company achieved various revenue reductions and efficiency gains. From January to September 2016, the company achieved operating income of 2.575 billion yuan. The year-on-year growth was 15.35%; the net profit increased by 281.43%.
4, in the warmer market, you should pay more attention to accounts receivable, you know
Ganzhao Optoelectronics released a forecast for its performance. It is estimated that net profit for the first nine months of 2016 will fall by 25.00% to 5.00%. Benefiting from the recovery of the LED industry market, the revenue of blue and green chip products maintained rapid growth. As a result of the increase in accounts receivable, the net profit decreased year-on-year.
5. I hope more and more LEDs will enter the list next year.
On October 13, Hurun Research Institute released the "2016 Hurun Report", Sanan Optoelectronics Lin Xiucheng, Lin Zhiqiang and his son ranked 77th with 24 billion yuan (the only listed company in the top 100 for LED listed companies), compared with last year. Falling 34 places, wealth has shrunk by 29%.
6, from EMC to PPP, the engineering lighting market ushered in an outbreak
Recently, the National Development and Reform Commission and other ministries and commissions issued notices to deepen the PPP innovation work in small and medium-sized cities and related industries in the municipal sector. Choose a small and medium-sized city with a certain PPP work foundation, good project reserve and development space from each province as a pilot.
Electronic Lock Motor product introduction:
Electronic Lock Motor, also known as Intelligent lock motor, Belong to small reducer series, the main structure composed of drive motor (motor) with a reduction gear box, composed of a shaft connection, form integrated motor reducer; Drive motor is purchasing product, reduction gear box is customized according to the project product demand, the maximum power under 10 w, maximum voltage up to 12 v, below 25 mm diameter size.
Functions: it is widely used in various intelligent locks, such as Shared bicycle lock, fingerprint lock, glass lock, safe lock, hotel lock, family lock, inductive smart lock, etc
Features:China Electronic Lock Motor is based on micro precision reducer development, small intelligent micro precision reducer can do 10 mm in diameter, is widely used in safe, locks, smart locks, sensor intelligent lock;
This kind of motor has the characteristics of low noise, low energy consumption, small volume, light quality, high precision, large torque and durability
Method of use: the best stable in horizontal plane, installed on the China Electronic Lock Motor output shaft parts, cannot use a hammer to knock, knock prone to press into the dc Electronic Lock Motor drive, may cause damage to internal components, and cannot be used in the case of blocked.
Operating temperature range:
Electronic Lock Motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a electronic Lock Motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
China Electronic Lock Motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
The longevity of Electronic Lock Motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you
Looking forward to your inquiry. Welcome to our factory.
Electronic Lock Motor,Motor For Electronic Lock,Electronic Lock Dc Motor,Electronic Lock High Speed Motor
Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com