Meizu and Xiaomi's direct grudges and enmities are talked about by many people. In addition to the relationship between Huang Zhang and Lei Jun, both mobile phones are often used to compare, especially a friend business conference. Here we do not say these things, to compare the next millet 5 high version and Meizu Pro5 standard version.
Consistent style, no lengthy nonsense and unrelated pictures, directly speaking about the advantages and disadvantages, to provide you with the most direct feelings.
Item source and use background
Millet 5 with high version: buy their own new products, ¥ 2299, white, use time 1 month;
Meizu Pro5 Standard Edition: buy new products for yourself, ¥1890, black, use time 4 months;
Exterior
Millet 5 is a 5.15-inch mobile phone, and Pro5 is a 5.7-inch mobile phone.
The back is more obvious is the Pro5's camera is raised, like a fire scorpion, and millet 5's camera is flat. Pro5 is a metal material and millet 5 is a glass back cover.
Both use pre-fingerprints. Xiaomi 5's fingerprints are more slender, and the front panel is slightly raised. Pro5 is slightly sunken. When pressed, Pro5 fingerprints feel more comfortable and natural.
In addition to the difference in appearance, the two are also functional differences
Meizu fingerprint is the so-called mBack, both touch back, press the Home key, and the millet Home button still has a return key on the right, touch can be set to return to the desktop, press the Home key, the difference is to touch the returned desktop Is the previously viewed desktop instead of the Home page
Payment support
Perhaps the reason for Ali’s shareholding is that Meizu has not supported WeChat’s fingerprint payment and only supports Alipay’s payment ;
Xiaomi is more austere. Both Weixin and Alipay do not support it . Personal speculation is because the interest division has not been settled and therefore it is not supported. In addition, it is rumored that Xiaomi is engaged in his own payment.
Here is to mention that there is a problem with fingerprint unlocking of Xiaomi 5 (I don't know if it is a case or system version problem). It may not be possible to unlock it after pressing the Home button. Pressing the screen again is OK and the chance is not high .
Many people think that the screen of the millet 5 is red, and I think so, but adjusting to cool colors is still very good. The Pro5 screen looks good on the front, but the camera shoots it red.
Of course it can also be turned into a cool tone.
Pro5's biggest problem with this screen is to look sideways. It is not just green, but a streaky stripe. The eyes can clearly see the dark light. If there is a habit of lying in bed and watching the phone before going to bed, it will be very Unhappy.
As for the bright screen, the ID of the rice 5 has no border.
Meizu Pro5 uses a 12V/2A charger, charging power up to 24W, while millet 5 uses a 12V/1.5A charger, charging power up to 18W. The measured charging curves of the two are as follows:
It is estimated that many people are not expecting that charging Xiaomi 5 from the beginning of 0 is actually full, which should benefit from the finer current division of QC3.0 and the optimization brought by intelligent current and voltage regulation.
From the charging curve point of view, the front 80% of the power, Pro5 is leading, which is the benefits of high-power charging, followed by the increase in power, charging power dropped significantly, the speed decreased.
Life, this is related to many factors, such as the brightness of the screen, such as whether you are playing games or browsing the web, personal use feels a little better, and there is no actual data, because it is difficult to quantify.
The main HiFi Pro5 is obviously better, which is beyond doubt.
m 5 daytime
Pro5's white balance is a little too partial.
Millet 5 at night, the whole is fairly clear
Pro5 night, the details are in a mess
Photograph of millet 5 is considered the first echelon of domestic production, and Pro5 is a lot worse. There is no need to compare it here. Millet 5's performance is better than that of Pro5, and it is more obvious.
If you are in the throat
Pro5's cracking at the antenna is a common problem. My Pro5 has two cracks in the fuselage after four months of use. One is the position shown in the figure, and the other is the antenna at the bottom.
MIUI ads , some people call MIUI dubbed ADUI, MIUI advertising there are many, but many can be closed, have no effect on the use, but sometimes it makes you feel unhappy
Pro5 is a mid-to-high-end mobile phone released by Meizu in the second half of 2015. Overall, it is relatively balanced and its use feels good. The legendary Bugme tends to be stable and does not have much problem. However, there are always three points that make people feel unpleasant. The poor screen looks blue on the side, and it is completely unpleasant for the camera effect. What is more unbearable is the common problem of cracking at the antenna.
The Mi 5 is the flagship mobile phone that Xiaomi brought about after a year and a half. It has greatly improved in terms of photographing and other aspects. However, the design of the ID without borders makes people have to give up, and the lack of fingerprint payment makes people feel less. Something, more and more advertisements of MIUI should be liked by few people;
The production process of a machine is the whole process of making a product from a raw material (or semi-finished product). For machine production, it includes the transportation and preservation of raw materials, preparation for production, the manufacture of blank, the processing and heat treatment of parts, the assembly and debugging of products, paint and packaging. The content of production process is very extensive. Modern enterprises use the principles and methods of systems engineering to organize production and guide production, and regard the production process as a production system with input and output.
The technological process
The technological process
In the production process, the process of changing the shape, size, position and nature of the production object, so that it becomes a finished product or semi-finished product is called the technological process. It is an essential part of the production process. Process: casting, forging, stamping, welding, machining, assembly processes, such as machinery manufacturing process generally refers to the part machining process and machine of the sum of the assembly process, other process is known as the auxiliary process, such as transportation, storage, power supply, equipment maintenance, etc. The technological process is composed of one or several sequential processes, and a process is composed of several working steps.
Working procedure is the basic unit of mechanical processing process. The so-called process refers to a (or a group of) workers, in a machine tool (or a working place), on the same workpiece (or at the same time to several workpiece) of the continuous completion of that part of the process. The main characteristic of a process is that it does not change the processing object, equipment and operator, and the content of the process is continuously completed.
Precision Cnc Machining,Cnc Machining Parts,Custom Cnc Machining,Precision Cnc Turning Parts
Tianhui Machine Co.,Ltd , https://www.thcastings.com