Editor's note: Salinen, a famous architect, said: “Architecture is like an open book, from which you can see the ambition of a city.†LED lighting is a popular theme for urban architecture night scenes, while it is widely used. It has also been blindly pursued by some city builders. The consequences of blindness are the emergence of multiple problems or hidden hidden. This article provides an in-depth analysis and research on these issues.
Foreword
The emergence of LED light source has opened up a new technical field for the field of illumination, and has been widely used in the characteristics of high efficiency, low power consumption, long life, fast response and filial response, especially in the display, indicator light, traffic. Signal lights and other aspects show its strong advantages. With the improvement of LED application technology, LEDs are widely used in urban night scenes, adding new vitality to the performance of urban night scenes, and thus are favored. However, we should see that because some cities did not carry out overall planning and positioning before the construction of the city night scene, LEDs were promoted as energy-saving products in the construction of night scenes, especially in the large-scale use of LED lighting in architectural landscape lighting. The night scenes of some cities seem to be disorderly and unsatisfactory, and the characteristics of the city's night scenes cannot be reflected. The image of the city is affected, which should attract the attention of governments at all levels and the city management departments.
At present, LEDs have problems in urban night scene applications.
1. Lack of planning and design, LED is blindly applied in night scene construction
Some cities did not carry out the necessary urban night landscape planning before the construction of the night scene. Even some single landscape lighting designs are often provided by lighting manufacturers or engineering companies to provide lighting solutions, especially in recent years. The proportion of applications is getting heavier and heavier, and the construction speed is getting faster and faster. There is a tendency to “suddenly come a spring breeze, and thousands of trees and pears bloomâ€. At the same time, when using LEDs, the color of light is not controlled, the use of colored light is more and more fancy, and the frequency of changing flashing is getting higher and higher, which makes the visual effect of night scenes more chaotic. Some cities' landmark buildings, administrative office buildings, residential buildings, etc. also use LEDs improperly, which makes these architectural landscape lighting lose their proper style, and even affects the residents' night life and interferes with traffic.
2. LED products are too single, the performance is too simple
Since LED products are still in the research and development stage, LED light fixtures, flat-line light strips, point light sources, line-type wall washers, etc., which are commonly used in night scene projects on the market, are commonly used. Although some manufacturers have also developed high-power LED floodlights, wall washers, etc., they are difficult to obtain due to their high cost. Especially in the architectural landscape lighting, a large number of simple design methods such as LED contour hooking, horizontal longitudinal array, and point and line combination have been adopted, resulting in repeated intersection, patterning, thawing, and compositional confusion of the city night sight line, resulting in night scenes. The effect is lacking in artistry.
a) improper use of colored light and dynamic light
Due to the rich color of LED light, the dynamic light performance is more flexible. In some cities, the construction of night scenes emphasizes the visual stimulation too much. The use of colored light and dynamic light is not limited and controlled, and even the pursuit of bright and beautiful, colored light and The flashing strobe lighting method, such as: excessive use of colorful water, full color jump, gradual change, etc., make the city's light color lose the tone, reduce the nightscape cultural taste, affect the public's appreciation psychology and aesthetic orientation.
b) LED inferior lighting products flood the market, causing waste of urban nightscape construction
At present, the country has not yet issued standards for LED quality testing. LED products on the market are difficult to distinguish. The quality of LED products is difficult to judge, and the restrictions on investment and bidding conditions and the drive of some engineering companies are beneficial. For other reasons, high-quality LED products are difficult to use, and some inferior and low-priced LED products are flooding the city's night market, which greatly affects the quality of urban nightscape projects. Some nightscape projects are in use. Soon, there was a phenomenon of high failure rate. Some of the problems occurred when the lamp was lighted while the lamp was on, which increased the maintenance and repair cost of the night scene, and even caused repeated investment and repeated construction.
1 2 Next Page
Foreword
The emergence of LED light source has opened up a new technical field for the field of illumination, and has been widely used in the characteristics of high efficiency, low power consumption, long life, fast response and filial response, especially in the display, indicator light, traffic. Signal lights and other aspects show its strong advantages. With the improvement of LED application technology, LEDs are widely used in urban night scenes, adding new vitality to the performance of urban night scenes, and thus are favored. However, we should see that because some cities did not carry out overall planning and positioning before the construction of the city night scene, LEDs were promoted as energy-saving products in the construction of night scenes, especially in the large-scale use of LED lighting in architectural landscape lighting. The night scenes of some cities seem to be disorderly and unsatisfactory, and the characteristics of the city's night scenes cannot be reflected. The image of the city is affected, which should attract the attention of governments at all levels and the city management departments.
At present, LEDs have problems in urban night scene applications.
1. Lack of planning and design, LED is blindly applied in night scene construction
Some cities did not carry out the necessary urban night landscape planning before the construction of the night scene. Even some single landscape lighting designs are often provided by lighting manufacturers or engineering companies to provide lighting solutions, especially in recent years. The proportion of applications is getting heavier and heavier, and the construction speed is getting faster and faster. There is a tendency to “suddenly come a spring breeze, and thousands of trees and pears bloomâ€. At the same time, when using LEDs, the color of light is not controlled, the use of colored light is more and more fancy, and the frequency of changing flashing is getting higher and higher, which makes the visual effect of night scenes more chaotic. Some cities' landmark buildings, administrative office buildings, residential buildings, etc. also use LEDs improperly, which makes these architectural landscape lighting lose their proper style, and even affects the residents' night life and interferes with traffic.
2. LED products are too single, the performance is too simple
Since LED products are still in the research and development stage, LED light fixtures, flat-line light strips, point light sources, line-type wall washers, etc., which are commonly used in night scene projects on the market, are commonly used. Although some manufacturers have also developed high-power LED floodlights, wall washers, etc., they are difficult to obtain due to their high cost. Especially in the architectural landscape lighting, a large number of simple design methods such as LED contour hooking, horizontal longitudinal array, and point and line combination have been adopted, resulting in repeated intersection, patterning, thawing, and compositional confusion of the city night sight line, resulting in night scenes. The effect is lacking in artistry.
a) improper use of colored light and dynamic light
Due to the rich color of LED light, the dynamic light performance is more flexible. In some cities, the construction of night scenes emphasizes the visual stimulation too much. The use of colored light and dynamic light is not limited and controlled, and even the pursuit of bright and beautiful, colored light and The flashing strobe lighting method, such as: excessive use of colorful water, full color jump, gradual change, etc., make the city's light color lose the tone, reduce the nightscape cultural taste, affect the public's appreciation psychology and aesthetic orientation.
b) LED inferior lighting products flood the market, causing waste of urban nightscape construction
At present, the country has not yet issued standards for LED quality testing. LED products on the market are difficult to distinguish. The quality of LED products is difficult to judge, and the restrictions on investment and bidding conditions and the drive of some engineering companies are beneficial. For other reasons, high-quality LED products are difficult to use, and some inferior and low-priced LED products are flooding the city's night market, which greatly affects the quality of urban nightscape projects. Some nightscape projects are in use. Soon, there was a phenomenon of high failure rate. Some of the problems occurred when the lamp was lighted while the lamp was on, which increased the maintenance and repair cost of the night scene, and even caused repeated investment and repeated construction.
1 2 Next Page
1. This product is used to convert the car power supply of mobile phone chargers
2. This product has over-current short-circuit overload protection
3. Insert this product into the cigarette lighter socket of the car
4. Confirm whether the power indicator light of this product is on
5. Insert the mobile phone charger into the socket of this product
6. This product is used in mobile phones, PHS, mobile phone line chargers, travel chargers, universal chargers, etc.
150w Car Inverter, 150W Power Inverter, Car Charger Inverter with USB
Shenzhen Jinziming Electronic Technology Co.,LTD , https://www.powerchargerusb.com