As the first batch of mostfun crowdfunding testers, we received instant pro (mostfun pro is a high-precision FDM desktop 3D printer. For printing principles and various parameters, I will put the information back to the end. Interested You can look at it.) It's been more than a month. I'm too lazy to die. . . This came to write out of the box and brief comment. Hahahaha. Who told me to be lazy?
I remember that since 9.9, I've been receiving express calls in the morning and I've been restless until the afternoon (a kind of blind date?). This big guy finally met with me ~~~ The corrugated carton was marked with the word Pro, with no other extra decorations. I like ~
Appearance is intact, no damage, forced open box ~~~~~
The top is the user manual and warranty card ~~
There are four simple black boxes in addition to the main body of the printer in the box. I like to use the power supply, the accessory repair tools used in the printer, and two volumes of 1KG PLA.
Each item in the accessory box is individually packed with a small bag and has a label, which is very intimate ~
The clothes are purple. Looking better than wearing clothes (manual shyness), many FDM printers on the market always look like semi-finished products. . . Pro is more in line with my personal mind. However, although the four sides seem to be more intuitive, but also more easily dirty. . Need to wipe it often. . I am so lazy. . Hey~~
The upper and lower sides of the printing platform were reinforced with foam, and there was a protective film outside the acrylic panel. Looking at the upper right corner, I had already torn open and looked.
The positive face that squats, please ignore my midnight out of the box so it is so dark. . . .
The screen is under the blue tape in the lower left corner. Hidden in the acrylic panel. Will open to you to see ~~~
The printing platform uses a removable aluminum plate. Underneath the aluminum plate is a hot bed. Yes, it is heated, but I haven't used it yet!
If there are extra aluminum plates, the machine has a pause function and can be continued.
There is an urgent part to fight and get it down. For the time being, I don’t need it.
The gold-colored wafer in the upper left corner is used for automatic leveling.
This is the effect of overlooking ~~~ looks pretty fine~~~
There is a camera just behind the extruder. You can see that you can't monitor the printing. Unfortunately, you can only watch it in real time and you can't record it. Otherwise, you can also use it as a monitor when you are not printing, or you can find out which step is the wrong one in the video.
Next is the long-awaited boot ~~~~ Carefully read the manual after two times, plug in the power, boot, feeding, leveling.
Hey, it's sauce purple~~
The back of the material and the front of the extruder are 3d printed.
The top of the screen is controlled by a scroll wheel. To tell the truth, it is not really a habit to start using it. But fortunately pro can wifi control, computers and mobile phones can be, do not need to install independent software or app, the webpage can be, this is very good!
What is a pity is that it can only be controlled with the Internet. Can not be remote ~ ~ ~ hope that the future will improve it ~
This is the pc end page ~~
This is the mobile phone page ~~
The interface is clear, concise but not simple, more worthy of praise.
Moreover, there is a Chinese version of the c4m slicing software that is specifically designed for mostfun matching. The interface is as simple
To be honest, after receiving the machine, I couldn't wait to print something. I didn't have time to slice it. So, I chose one of the files that came with the machine. (The machine comes with several tests. file).
The machine has more than 1g of built-in storage space. Sliced ​​files can be uploaded directly to the machine via the network, so that you do not need to use u disk or memory card, and do not have to fear a sudden disconnection.
To tell the truth, I still don't know if this is a fight. . but. .
The quality is not bad, there are figures next to it, I do not know if you can see it ~
Oh yes, I don't know if you guys are still using textured paper, really speaking, glue sticks are good, and, when I heard about a roll of textured paper money, I could buy a half box of glue sticks~~
After that I played two vases again~~~
The first one finished with an excitement. . . . There is no end. . . Stick directly to the floor. .
The second half went out of power. . . We changed from vase to bowl. . . 눈_눈
So I replayed it again. . When the old driver taught me I couldn't get it down, I would flush it with water and I could get it down. . Measurable feasible ~~~
Both of these did not add support and the results were really good. A lot of confidence. I hit this ~~~ that I always wanted to fight.
That's right, this is the hunter's skull (you also want one to poke here http://most3d.cn/model/13055/), that is, the cover that first time you see that it's beautifully fried, you have to hit it One. . . This skull I played for three days and nights. . . At that time I wouldn't see the estimated time yet. . . It is thought that one day will be completed. . . The result was so long ~~~~. . This dense support. . . Looks like it has been added. . . They also say that I am looking for child abuse. . . Used all the tools available. . . Awl, pliers, tweezers, screwdriver, etc. . . After more than 6 hours, it was like this.
In the end, the total number of cleanliness was more than 180 grams, and it was nearly 400 grams. . . You know how big the workload is. . . Inside the full support, I got clean! ! ! Is it very powerful! ! It took a full one week to get up and get up whenever you needed it. . . Seriously, it's a bit addictive. . . .
I also played my own bilibili tv model (poke here http://most3d.cn/model/13056/)~~嘿嘿~~~
As shown in the figure, because there may be less glue, when it reaches a certain thickness, the bottom is curled up, but it seems that the impact is not great, and it will continue to be played. It seems like there is no problem to play.
To sum up, mostfun's overall conciseness, from the packaging to the machine to the operator interface, and the simplicity of the atmosphere, including mostfun's own model stations, is also such a feeling.
Although it is still not perfect, but progress is really fast. I am looking forward to it. They can do better. The printing accuracy is enough for me at present.
I hope to have a light cure when I study this machine almost, oh~~~
In the end, I posted the parameters of the machine just left and the principle of FDM printing. Everybody in the province went searching for it~~
No interest, the evaluation ended here, thank you for watching, thank you ~ another right away at the end of the month, we all know. . Silver is not worth it to me as soon as it expires. Give me friends~~~ It's not easy for people to write~~~ Rolling and asking for money Wow~~~~
Product specification
Technology Type: FDM (Thaw Stacked) Desktop 3D Printer
Machine size: 34 (cm) 34 (cm) 38 (cm)
Print size: 220 (mm) 180 (mm) 160 (mm)
Nozzle diameter: 0.4mm
Printing accuracy: 0.1mm
Minimum layer thickness: 0.05mm
Connection method: wifi
Supporting materials: PLA, ABS, TPU, etc.
Technical Parameters
Molding accuracy
The accuracy of the print model is not less than ±0.2mm/50mm (the model with a print height, width and height of 50mm, the actual size deviation is not higher than ±0.2mm.
Maximum print speed
The maximum print speed is 200mm/s, and the accuracy of the print model conforms to the requirements.
Print layer thickness
The print layer thickness range is 0.1mm~0.4mm, and the accuracy of the print model meets the requirements.
Printing temperature
Extruder operating temperature range 190 ~ 240 °C
working principle
Mostfun Pro 3D printers use the FDM technology commonly used in desktop 3D printers. FDM is the abbreviation of “Fused Deposition Modelingâ€, which is a method of melt deposition. It is a method of heating and melting thermoplastic materials (PLA, ABS, TPU, and other materials) to form a stack.
The working principle of FDM is: under the control of the computer, the heating nozzle is under the control of the computer, and the XY plane motion is performed according to the sectional profile information of the product part. The thermoplastic filament material is sent to the hot melt nozzle by the yarn feeding mechanism, heated and melted in the nozzle and extruded into The semi-liquid filaments are selectively coated on the table and rapidly cooled to form a thin sheet profile. After one layer of cross-section is formed, the table descends to a certain height, and then the next layer of cladding is performed, as if the cross-sectional contour is drawn in layers, so that a cycle is formed and a 3D model is finally formed.
Official website:
Model Station:
The official current price is 11,000rmb.
Sfp Fiber Adapter,St Fiber Coupler,St Fiber To Ethernet Converter,Sfp To Sc Adapter
Ningbo Fengwei Communication Technology Co., Ltd , https://www.fengweicommunication.com