When Sister Paper used the computer recently, she always felt that the fan's noise was always great
I let her hand next to the outlet and feel the air volume, saying that it is very uneven, the wind is still relatively small
Well, you take it, I see
text â–¼ Sister paper computer is not the same, positive Mickey is prominent
â–¼ Although the tool is very general, but useful
â–¼ Without saying anything, first turn to the D side, a lot of grilles, you can see a lot of things through the grille. However, there is no baffle that can be easily dismantled on the D side, which means that if you want to upgrade or replace the configuration in the future, you need to fully disassemble it.
â–¼First look at the nameplate to determine the model, it is indeed the E5-471 series, but the following small model is slightly different
To remove the maneuvering hand, first step down the battery and use a screwdriver to slide the hole to the right and the battery can be removed.
â–¼ It feels like Acer's battery is fixed in this way
â–¼ Then return to the nameplate and unscrew the screw
You can pull out the optical drive, pull out the drive, my tears fall, the original drive was castrated, leaving only a plastic bracket
Pull out the drive and you can unscrew all the screws you can see on the D side.
â–¼ more spindle fixing screws
â–¼The notebook's sound hole in the bottom, it is easy to be blocked
â–¼ Unscrew all the screws on the D side and turn it to the C side. It is found that the keyboard and the C side are integrated structures, so there is no need to separate the keyboard
â–¼ Since the keyboard does not need to be dismantled, then it should be lifted up directly. Using the fins, it will curl up along the gap on the C surface.
â–¼ After opening all the clips on the C side, the main board of the notebook is fixed on the C surface. Therefore, the D side should be deducted. Observe the structure, select the D side of the CD drive, and then Push along the direction of the interface, you can remove the D surface
â–¼But be careful not to remove the D surface directly, but also be careful to observe the presence or absence of the cable connection. There is an acoustic cable at the position of the D surface sound. Remove this cable first to completely remove the D surface.
â–¼After removing the D side, turn the D side over and find it quite clean. There is no dust on the D side.
â–¼ But! but! but! What is this? ! !
â–¼ remove the D side will be able to see the motherboard, the upper right corner is a mechanical hard drive, if you need to change the solid state will have to replace here, the hard disk next to the keyboard cable, the keyboard cable below is a wireless network card, wireless card is the memory card on the left Slot, this notebook has two memory slots, you can choose to upgrade the dual channel, the bottom left corner of the motherboard is a thermal module, single fan single heat pipe, CPU and GPU series cooling
You can remove the fan by unscrewing the fan's screw. If you remove the fan by daily cleaning, you can clear 80%.
â–¼ Not only is the fan blade quite dirty, inside the fan there are many solid fins on the radiating fins. Clean up and put them back in reverse order.
1, the first is lower, disassemble power! Disassemble power! Disassemble power!
2, some computer structure will be more strange, such as today's Acer, his motherboard is fixed on the C surface, rather than the same as most of the notebook fixed on the D surface, so dismantling should be bold Mindfulness, while groping again and again, but also pay attention to cable
3, remember that the owner of the computer should be sister paper
Acer official flagship store - Jingdong Acer official flagship store, offers acer official flagship store all kinds of authentic goods offer, promotions, reviews, shopping guides, pictures and other information, you are welcome to revisit the acer (acer) Direct links to official flagship store mall.jd.com thank you all!
END
Our surface mount box could include the CAT5E CAT6 CAT6A RJ45 Connectors
The surface mount box is an ideal for wall box and wire installation, we design many junction box, back mount box, blank mount box, loaded surface mount box.
Mateiral: ABS, PBT UL94V-0
1~8 ports and colors supply for your choice, they are an ideal for low voltage application for your security, data, networking solutions and telecom projects.
blank surface mount box, junction box, surface mount box, loaded surface mount box in China supplier
NINGBO UONICORE ELECTRONICS CO., LTD , https://www.uonicore.com