The car chip inductive anti-theft system is adhering to the safety concept of “vehicle anti-theft†and “bottom prevention†popular in the international automobile industry. Using the latest RFID technology, the new R&D and production technology is based on safe, reliable, simple and practical, more humanized design ideas. A generation of car anti-theft products to achieve the safety purpose of anti-theft, anti-robbery and anti-theft.
This article refers to the address: http://
Chip-type digital anti-theft device is the focus of the development of car alarms. Most cars use this anti-theft method as the original anti-theft device.
The basic principle of the chip type digital anti-theft device is to lock the motor, circuit and oil circuit of the car, and the vehicle cannot be started without the chip key. The digitized password has a very low re-encoding rate, and the password key can be used to contact the lock on the car to unlock the lock, thus eliminating the drawback of being scanned. At present, many high-end cars imported, domestic Volkswagen, Guangzhou Honda, Palio and other models have been equipped with the original chip anti-theft system.
At present, the chip-type anti-theft has been developed to the fourth generation. The latest generation of the fourth-generation electronic anti-theft chip has a special diagnostic function, that is, the authorized person can obtain the history information of the anti-theft system when reading the key confidential information. The number of authorized spare keys, time stamps, and other background information in the system form an integral part of the transceiver's security features. In addition to the more effective anti-theft function than the previous electronic anti-theft system, the fourth-generation electronic anti-theft system has other advanced features: its unique radio frequency identification technology (RFID) can ensure that the system can correctly identify the driving under any circumstances. The driver automatically recognizes his or her identity as the driver approaches or moves away from the vehicle, automatically opening or closing the lock; the original TMS37211 device can easily detect the position of the electronic key, both inside and outside the vehicle.
Car chip induction anti-theft system
1, product performance
The car chip inductive anti-theft system is adhering to the safety concept of “vehicle anti-theft†and “bottom prevention†popular in the international automobile industry. Using the latest RFID technology, the new R&D and production technology is based on safe, reliable, simple and practical, more humanized design ideas. A generation of car anti-theft products to achieve the safety purpose of anti-theft, anti-robbery and anti-theft.
2, product composition
The product consists of three parts: control host, digital lock and electronic key.
3, product features
(1) The electronic key adopts the most safe American high-tech anti-magnetic chip, which does not need battery power, waterproof, dustproof and shockproof. Each electronic key is a rolling code technology, the only code in the world, can not be copied, can not be imitated, can not be changed.
(2) The digital lock can be installed in any convenient and concealed place in the car according to the owner's habits. Only the owner knows the unlocking position.
(3) The identification distance of the electronic key and the chip sensor lock is controlled within 10cm, which completely solves the possibility of decoding and decoding in the air by decoding and scanning, and truly achieves anti-interference.
(4) The control host is equipped with a built-in secondary anti-theft device, which is more effective in preventing malicious thread trimming, destroying the car theft behavior, and further strengthening the anti-theft function.
(5) It is easy to install and use, does not change the original car system status, does not abandon the original car remote control device, and has no trouble to replace the battery. At the same time, the system itself has self-detection and self-protection functions, which is more convenient to use.
4, the operation method
(1) Before the car starts the engine, it must first carry out identity verification. The car mainly uses the electronic key that is carried with it to sense the position of the hidden digital lock. The distance can be within 10cm. When the "drip" is heard twice, the identification is successful, the warning indicator is off, and the ignition can be started normally with the car key. If the car is not activated after more than 30 seconds, the system will automatically enter the anti-theft lock state again.
(2) After the car is turned off and the engine is turned off, the anti-theft system will automatically lock after 30 seconds, and the warning indicator will start to light and dim, prompting the anti-theft system to enter the automatic alert state. At this time, if there is no identification of the chip sensor lock by the electronic key, the car cannot be started.
(3) If the user chooses to switch on the alarm horn mode, the car will be started before the identity is recognized. At this time, the car horn will sound an alarm and the car will not start.
(4) Repair the car mode, the main card is close to the anti-theft lock. After 8 seconds, the system will issue “BiBiBi†three times. At this time, the car repair mode is entered and the anti-theft system is turned off. To access the repair mode, repeat the above.
5. Technical indicators:
Working voltage: 12VDC±4VDC
Working current: <20mA
Working temperature: -40 ° C ~ 85 ° C
Load current: 14VDC/40A
A 20-port USB Cabinet Charger is designed to be mounted on a wall or placed on a desk, and it has multiple USB ports to accommodate various devices such as smartphones, tablets, or portable gaming consoles.The number of ports can vary, but a 20-port charger allows for the charging of up to 20 devices simultaneously.
The cabinet design of this charger provides a neat and organized solution for charging multiple devices. It usually has individual compartments or slots for each device, preventing tangles and keeping the charging area clutter-free. Some models may also have built-in cable management systems to keep the charging cables organized and easily accessible.
These chargers often come with features like smart charging technology, which automatically detects the optimal charging speed for each device to ensure fast and efficient charging. They may also have built-in safety features such as overcharge protection or short-circuit prevention to safeguard the devices being charged.
USB Cabinet Charger,Multi USB Port Charger,Bluetooth headphone charger
shenzhen ns-idae technology co.,ltd , https://www.best-charger.com