SSTP Cat7 cable, Lan cable & Patch cords
Cat7 with each pair Shielding;Â Â
24/26/28AWG
OD: 6.5mm/7.0mm/7.2mm
Conductor:Â Â OFC
  (7/0.16BC*4P+AL)+D7/0.16BC+B96/0.12AL-Mg  OD:7.0mm
Cat7 cable laying is a by Category 7 certified, high quality network cable installation and ideal for all structured cabling by Category 7. From construction to industrial use, you can use the  Cat7 to achieve a first-rate data transmission. The typical application is the cabling network outlets and patch panels.
Properties Construction:
- Conductor of plain copper wire 4x2
- 8 wires shielded pairs screened pairs foil shield
- braid shielding as overall shield
- High quality cable construction, cable diameter upto 7.2 mm
 Networking cable
SSTP Cat7 cable, Lan cable & Patch cords
Cat7 with each pair Shielding;Â Â
24/26/28AWG
OD: 6.5mm/7.0mm/7.2mm
Conductor:Â Â OFC
  (7/0.16BC*4P+AL)+D7/0.16BC+B96/0.12AL-Mg  OD:7.0mm
Cat7 cable laying is a by Category 7 certified, high quality network cable installation and ideal for all structured cabling by Category 7. From construction to industrial use, you can use the  Cat7 to achieve a first-rate data transmission. The typical application is the cabling network outlets and patch panels.
Properties Construction:
- Conductor of plain copper wire 4x2
- 8 wires shielded pairs screened pairs foil shield
- braid shielding as overall shield
- High quality cable construction, cable diameter upto 7.2 mm
Â
Gesture Sensor Light includes two colors, that is Gesture Sensor Adjustable Light Tiffany Blue and Gesture Sensor Adjustable Light Sakura Pink. As desk lamp, bedside lamp, emergency lamp, Christmas and birthday gifts, this product will be your best choice for varied occasions.
Features:
- ABS material: soft body; intimate feeling
- Breathing state: best sleeping companion
- Adjustable brightness: meet different demands on light
- Minimalist design: Nordic style; pursue beauty from technology
- Rechargeable lithium battery: power saving; low power consumption
- Gesture sensor: without physical switch, for more convenient experience
- Soft light source: Without flickering or blue light; warm light color temperature; eye-caring
Specifications:
Power |
0.1-2W |
Shell Material |
ABS |
Input Voltage |
DC5V/1A |
PCS/CTN |
24PCS |
Battery Capacity |
2600mAh |
Per CTN |
58x40x41.5cm |
Per piece |
16x16x7.5cm |
Per pack N.W./G.W. |
0.4KG/0.8KG |
Per pack |
18x18x9.8cm |
Per CTN N.W./G.W. |
19.2KG/21KG |
Approved Certifications: CE,FCC, RoHS
OEM Customization: available
Instructions:
1.Activate and cut off power supply
- Activate power supply: for first using or restarting, by USB wire connect product to any devices with USB port, as PC, laptop, power bank etc.
- Cut off power supply: pull out external power supply wire of product; move hand back and forth quickly for more than 3 times, above induction point; light will flash quickly for 3 times, then power is cut off. It's recommended to turn off power when the product will be idled for a long time or moved to a distant place.
2.Turn on /off light
- Turn on the light: on condition of light being off but activated, move hand for 1 time above induction point.
- Turn off light: on condition of light being on, move hand for 1 time above induction point.
3.Adjust brightness
On condition of light being on, keep hand within 20cm above induction point, then brightness will change cyclically from bright to dark. Move off hand till the brightness is proper.
4.Turn on / off breathing state
- Turn on breathing state: on condition of light being on, move hand back and forth quickly above induction point for 1 time, then brightness will changefrom bright to dark.cyclically and automatically, with a frequency of 16 times per min., which is the breathing state.
- Turn off breathing state: on condition of breathing state, move hand for 1 time above induction point, then light is off ; when breathing state lasts for 20mins, then light is off.
Recommendation for use:
- The height of gesture should be within 20cm above the induction point of product.
- Within 60cm above induction point, shielding object is not allowed lest misoperation may occur.
- Recommended to supply power to the product by USB power adapter with DC5V/1A specification.
- The battery in the product performs best when working at normal room temperature of 30℃ ~ -5℃.
- When the product is out of power, please insert the enclosed USB wire into USB port of other devices, with time for 3-4hs.
Gesture Sensor Light
Gesture Sensor Light,Intelligent Sensor Light,Led Motion Sensor Light,Sensor Gesture Control Light
Ningbo Sinco Industrial & Trading Co., Ltd. , http://www.newsinco.com